shape Type name PN-T3 PN-R02 PN-M1Through-beam type Specular reflection type Diffuse reflection typeDetection distance 3 m 200 mm 1 mDetecting objects Opaque bodies with a diameter of 8 mm or more 200 x 200 mm white matte paper Opaque bodies with a diameter of Ø30 mm or more

(HY-M5 uses a retroreflective panel)power supply voltage 12 – 24 VDC (± 10 %)Consume current Below 40 mAOutput Action The light-in/light-out operation of the control line is selected (however, for through-beam types, this is limited to the light-receiving part).Control output NPN voltage output, load voltage: below 30 VDC, load current: below 200 mA (impedant load), residual voltage: below 1 V.Protection circuit Built-in power supply reverse connection protection circuit, output short circuit overcurrent protection circuit.Response time Less than 3 msLag effect – Less than 20% of the movement distance –Light source for projecting light Infrared LED (modulation mode)Action indicator light Receiver: Red LED; Projector: Red LED (for power display)Sensitivity adjustment Volume is adjusted according to sensitivity (except for through-beam projectors).Material CASE polycarbonatelensUse ambient light Sunlight: below 11000 lx; ​​Incandescent lamps: below 3000 lxUse ambient temperature and humidity. Operating temperature: -10 to 60 °C; Storage temperature: -40 to 70 °C; Humidity: below 85% RH (but without condensation).Withstand voltage 500 VAC (1 minute at 50/60 Hz)Insulation resistance 20 MΩ and above (500 VAC, wires and cases, contacts and power supply)