Function General High-performance (timer function) 2 channels2 inputs, 1 output 2 inputs, 2 outputsType name HPAN-C7 HPAN-CT7 HPAN-C7Wpower supply voltage 100 – 240 Vac (50 – 60 Hz) ±10%Consume electricity Approximately 15 VAExternal output power supply 12Vdc (±10%), 200mA Maxenter [H] Level 4 – 30 V dc, [L] Level 0 – 2 V dc

Internal Pull-Up/Pull-Down impedance connection (4.7 kΩ) based on NPN/PNP switch settings.

NORM/INV Input Signal Inversion FunctionControl output There is a contact point OUT OUT1, OUT2NO contact: 250 V ac 3 A impedance load; NC contact: 250 V ac 2 A impedance load.

The relay has a rated load life of over 100,000 cycles.No contact OC OUT –NPN open collector 30 V dc 100 mA Max.

* Isolated (insulated from internal circuitry)Output response speed Relay contact: Approximately 10 msNPN collector open circuit: less than 5 µs –External synchronization function Synchronization during IN and ES periods
Output function IN, ES period/ differential contemporaneity

Output function –Timer function – Three timer setting modes (ON DELAY, OFF DELAY, ONE SHORT DELAY)

The timing can be set (minimum 40ms – maximum 10s). –Use ambient temperature and humidity -10 ~ 55 °C, 35 ~ 85% RH (no condensation/icing allowed)Noise resistance Square wave noise generated by the noise simulator (1 μs pulse per 16 ms)
+ / – 2 kV (supply to the power input terminal)Withstand voltage 1500 V ac 60 Hz for 1 minuteInsulation resistance 10 MΩ or higher (500 V dc, between charging section and case)Vibration resistance 10 ~ 55 Hz, complex amplitude 0.75 mm, 2 hours in each of the X, Y, and Z directions (but without power on).Impact resistance 100 m/s² (approximately 10 G), twice in each of the X, Y, and Z directions (but without the power on).weight Approximately 160g