Description

download：HEP50B_HEP58B_catalogue_cn

model			HEP50B	HEP58B
shape
Electrical Specifications	Phase difference output		Phase difference between phase A and phase B: ± T/8 (1 period of phase A = T)
	Response speed		Maximum 100 KJ
	Rated Voltage	Voltage output	※ Composition depends on the model. 5 VDC ±5% 8 – 30 VDC ±5%
		Open collector
		Push and pull
		Line drive	5 VDC ±5%
	Consume current		Below 60 mA (no load) (Line drive: below 150 mA)
	Connection method		Cable lead-out type
	control Output	NPN voltage output	Load current: below 30 mA (lowest) Residual voltage: Below 0.4 V (highest) Residual voltage: VCC * 70% or higher
		NPN Open collector
		Push and pull
		Line drive	Load current: below 20 mA; residual voltage at low speed: below 0.5 V; residual voltage at high speed: above 2.5 V
	response time	Voltage output	Less than 1 μs (wiring length: 1.5 m, absorption current = 30 mA)
		Open collector
		Push and pull	Less than 1 μs (wiring length: 1.5 m, absorption current = 10 mA)
		Line drive	Less than 1 μs (wiring length: 1.5 m, absorption current = 30 mA)
Mechanical Specifications	driving force		1× ^10⁻³ N·m	1× ^10⁻³ N·m
	Moment of inertia		40N	40N
	Axle load		20N	20N
	Maximum number of rotations		5,000 rpm
Environmental Specifications	Insulation resistance		100 MΩ or higher (500 VDC mega-reference between terminals and housing)
	Withstand voltage		800 VAC (1 minute between terminals and housing at 60 Hz)
	Vibration resistance		50 m/s, 10-200 Hz, twice each in the X, Y, and Z directions
	Impact resistance		980 m/s, 6 m/s, twice each in the X, Y, and Z directions
	Ambient temperature		-10 ~ 70 ℃ (no condensation), for storage: -30 ~ 85 ℃
	Ambient humidity		35 ~ 85% RH
	cable		5P, Ø 5.0 mm, Length: 1.5 m, Protective Cable (Line-driven type: 8P, Ø 5.0 mm, length: 1.5 m, protective cable)
	Accessories		Couplings, mounting brackets
Certification