model PLD-R2N PLD-R2Pshape Detection method Diffuse-reflectiveDetection distance 2 mDetecting objects 200 x 200 White matte paperpower supply voltage 12 – 24 VDC ±10%Consume electricity Below 30 mm DCControl output ▪ NPN open collector output, load current: 150 mm (30 VDC) or less

▪ Residual voltage: below 1 VDC ▪ PNP open collector output, load current: 150 mm (30 VDC) or less

▪ Residual voltage: below 1 VDCAction mode Light on actionResponse time 1㎳ or lessLag phenomenon Within 20% of the detection distancelight source Infrared LED (850 mm)indicator lights Control output indicator: Red LED; Stable display: Green LEDSensitivity adjustment Built-in sensitivity adjustment potentiometer (return angle: 220°)Protection circuit Power supply reverse polarity connection and overcurrent protection circuitUse of ambient illuminance ▪ Sunlight: Below 11,000 Lx ▪ Incandescent lamps: Below 3,000 LxOperating environment temperature and humidity ▪ Operating temperature: -20 ~ 60 ℃, ▪ Storage temperature: -25 ~ 70 ℃, 35 ~ 85 % RH (but no condensation)Protective structure IP64 (IEC standard)Insulation resistance 20 cc or higher (500VDC reference)Withstand voltage 1,000 VAC, 1 minuteVibration resistance 10 – 55 Hz, dual amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions.Impact resistance 500 m/s², quadratic in each of the X, Y, and Z directions.Connection method ▪ Number of wires: 3P ▪ Thickness: Ø3 mm ▪ Length: 2 m (but the projector is 2P)Material ▪ Housing: PET, ▪ Lens/Lampshade: PC, ▪ Lens: PMMAcable 3P (26 AWG), Length: 2 mappendix Adjustment screwdriver, fixing screws (3-M3 x 17L)Certification weight Approximately 60 g