model PL-D2Bshape Detection method Distance-settableDetection distance 0.2 ~ 2 mDetecting objects 200 x 200 mm white matte paperpower supply voltage 12 – 24 V dc ±10%Consume current Below 30 mg/dcControl output • NPN/PNP open collector simultaneous output

• Load current: 150 mm (30 V dc) or less

• NPN residual voltage: below 1 V dc

• PNP residual voltage: below 2 V dcAction mode Light On / Dark On ※ Mode selection via rotary switchResponse time 2㎳ or lessLag Action distance less than 10%Special light source for light emission Infrared emitter (880 mm)Light receiving element 2-frequency divider photodiodeIndicator light • Control output indicator: Red LED • Safety indicator: Green LEDSensitivity adjustment Rotary adjustment switchProtection circuit Power reverse connection and output short circuit protection circuitUse of ambient illuminance • Sunlight: Below 11,000 lx • Incandescent lamp: Below 3,000 lxOperating environment temperature and humidity • Operating temperature: -20 ~ 60 ℃  • Storage temperature: -25~70℃, 35 ~ 85 % RH (but, no freezing or condensation allowed)Protection level IP65 (IEC 60529)Insulation resistance 20 ohms or higher (500 V dc MEGA standard)Withstand voltage 1,000 V ac (50/60 Hz for 1 minute)Vibration resistance 10 – 55 Hz, dual amplitude: 1.5 mm X, Y, Z directions, 2 hours each.Impact resistance 500 m/s² X, Y, Z, 3rd order in each directionConnection method • Cable lead-out type • Number of wires: 4P • Outer diameter: Ø4 mm • Length: 2mMaterial • Casing: PC • Lens: PCAccessories Base, adjusting screwdriver, bolts, nutsCertification