model T38ATypes of timers Analog small timerpower supply voltage 24 – 240 V AC 50/60 Hz, 24 – 240 V DC UniversalPermissible voltage variation rate ±10% of the power supply voltageConsume electricity ▪ Below 4.1 VA (24 – 240 V ac 50/60 Hz)

▪ Below 2 W (24 – 240 V dc)Action time range 0.1 sec ~ 60 hoursAction time error • Setting error: ±5% ±0.05 sec or less    • Repeatability error: ±0.3% or less

• Voltage error: ±0.5% or less    • Temperature error: ±2% or lessRecovery time Below 100 msExternal connection method 8-pin socketcontrol

Output Action mode A/B/C/D/E/F (Select using the front motion mode selection switch)Contact configuration • Instantaneous SPDT (1c) + Timed SPDT (1c)

• Limited-time DPDT (2c)

* Automatically changes contact configuration based on operation modeContact capacity • NO (250 V ac 3A resistive load)     • NC (250 V ac 2A resistive load)Relay lifespan • Mechanical life: Over 10 million cycles

• Electrical life: Over 20,000 cycles (250 V AC 2A resistive load)Insulation resistance 100 MΩ and above

(500 V dc Mega standard, conductive terminals and exposed unfilled metal parts)Withstand voltage 2000 V ac 60 Hz 1 minute (conductive terminals and exposed non-filled metal parts)Interference resistance ±2kV (between operating power terminals, Pulse width = 1us, square wave interference generated by interference simulator)Vibration resistant 10 – 55 Hz (1 minute) Reset width 0.75 mm X, Y, Z 2 hours per directionImpact resistance 300 m/s² (30G) X, Y, Z directions, 3 times eachUse ambient temperature -10 ~ 55℃ (but not in an ice-free state)part • Fixed bracket

• BRACKET-M (48.0 x 59.0 mm) Embedded BracketParts (sold separately) • RACKET-S (48.0 x 48.0mm) Embedded size conversion

• BRACKET-L (53.5 x 84.4mm) Embedded size conversionWeight (g) Approximately 74 g (the main product)Certification