model TS510W x H x D (㎜) 145 x 145 x 33.5power supply voltage 100 – 240 V ac voltage variation rate ±10%Power frequency 50-60 kgConsume electricity 30 VA maxWithstand voltage – Input and output terminals: Minimum 1500 V ac for 1 minute

– Input terminals and FG terminals: Minimum 1500 V ac for 1 minute.

– Output terminals and FG terminals: Minimum 1500 V ac for 1 minuteInput types – 11 types of thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26) ±0.15% of FS ±1 digit

– Two types of resistance temperature detectors (RTDs) (Pt-100, KPt-100) ±0.1% of FS ±1 Digit,

– Current and voltage ratings (4 values : -10 – 20 mV, 0 – 100 mV, 1 – 5 V, 0 – 30 V) ±0.1% of FS ±1 DigitSampling period 250 msContact input (DO) relay contacts

Up to 32 points A contact 30 V dc max. 3 A, 250 V ac 3 AB contact NO: 30 V dc max 5 A, 250 V ac 5 AControl input SSR Output ON: 18 V DC pulse voltage (load resistance above 800 Ω)SCR output 4 – 20 mA dc (load resistance below 600 Ω)Transmission output Current output 4 – 20 mA dcLoad impedance Load resistance below 600 ΩOutput types Laboratory PV, Laboratory SV, High-temperature greenhouse PV, Low-temperature greenhouse PVUpdate cycle 250 ms

Function

enter

Input correction EUS (0 ~ 100%)Input filtering 0 ~ 120 secondsControl output Selectable output (SSR) or current output (4 – 20 mA dc)Control Action Test mode Maximum of 100, with 10 test types selected for each mode.PID group Four groups each for high-temperature greenhouse and low-temperature greenhouse, with PID deviation.Automatic calculation Automatic calculation based on target set valueBili belt 0.00 ~ 100.00% (ON/OFF control at 0.00%)Integral time / Differential time 0.0 ~ 3000 seconds (OFF state when set to 0 seconds)ON/OFF control Set the ratio band to 0 (PB) and set it to 0.0.Forward/ Reverse Based on the positive/reverse action of the control inputForward/ Reverse ARW zone setting (50 ~ 1,000% of the belt width)AT GAIN 0.0 ~ 10.0Alarm settings Set alarm System alarm at 8 o’clockAlarm types Absolute upper and lower limits, deviation upper and lower limits, within and outside the range (alarm direction, maintain).Absolute alarm setting range EU (0 ~ 100%)Image specifications TFT color LCD (115.2 x 86.4 mm)resolution 640 x 480 pixelsBacklight LED backlightBacklight lifespan Approximately 40,000 hTouch type Resistive touchscreen (4-wire)Language used Korean/English/Simplified ChineseStorage function Memory (non-volatile memory: 80 MB), external storage (SD card (4 GB)), storage cycle (1 ~ 360 seconds)Memory information Stored program information and settings, storage recovery, temperature and humidity settings, and indicator values.Operating environment temperature and humidity 0 ~ 50 ℃, 20 ~ 90 % RH (but no condensation)weight Approximately 1.32 kg